Auxiliary equipment
Water Treatment System
It is suitable for such water treatment equipment as pure water, mineral water, and beverage process water. It is mainly composed of the following equipment: Pre-treatment System (multi-medium filter, active carbon filter, ion exchanger, Millipore filter), membrane separation System (Ultrafilter, nanometer filter, RO System), electrodialysis device, sterilization System (UV device, ozone device) and so on.
Product’s scope:
RO series
Filter series
Membrane and filter core
Ozone/ultraviolet sterilization system
Applied scope:
Pure drink water, mineral water, mineralized water, spring water
Water for food and beverage production
UHT System
The blended material, prior to be filled, needs to be sterilized with the most common process, thermal sterilization. According to different product characteristics, the subsequent matching of the filling process and the shelf life, ultra-high temperature treated (UHT) can be selected, usually heating to 130 °C for more than a few seconds.
Heat exchanger may be in the form of a plate, a tube, a bellows, or the like. For products with pulp particles or high viscosity, tubular exchangers must be used to prevent clogging. At the same time, the tubular heat exchanger also has a more powerful pressure bearing capacity.
For cloudy beverage or milk based juice, we recommend tubular UHT; for a clear juice, plate UHT can be used
CIP System
CIP system is to automatically clean all surfaces that come in contact with the product. The objects to be cleaned include the inner walls of tank, pipe, hydraulic cylinder, and other liquid passages.
It is usually composed of cleaning liquid storage tanks, acid-base adding device, heater, cleaning pump, return pump, pipelines, steam valve group, etc.
According to the different cleaning objects, it can be divided into single-channel, double-channel, and multi-channel . For automatic CIP, the concentrated acid and alkali adding, metering and the temperature of the cleaning solution are all automatically controlled. The cleaning program is also performed automatically after the parameter setting.